Kia Forte: Component

Concentric Slave Cylinder Assembly

...

Removal

1. Remove the transaxle assembly. (Refer to Manual Transaxle System - " Manual Transaxle") 2. Remove the concentric slave cyl ...

See also:

Manifold Absolute Pressure Sensor (MAPS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Conditio ...

Compressor Installation
1. Make sure the compressor mounting bolt with the correct length is screwed in. Tighten the mounting bolts (A) with the specified tightening order. ...

Assist Handle Component Location
1. Assist handle ...