Kia Forte: Door Switch Inspection - ISG (Idle Stop & Go) System - Engine Control / Fuel System - Kia Forte TD 2014-2018 Service ManualKia Forte: Door Switch Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / ISG (Idle Stop & Go) System / Door Switch Inspection

1.
Remove the door switch and check for continuity between the terminals.

Door Switch Description
Via the seat belt/Door switch, the ISG function can detect that the driver has fastened the seat belt/door. If the driver has not fastened the seat belt/door, the ISG function reacts as follo ...

Door Switch Removal
1. Remove the door switch (A) after loosening the bolt. ...

See also:

ESC Control Module Removal
1. Turn the ignition switch OFF. 2. Pull up the lock of the HECU connector (A) , then disconnect the connector. ...

Fuel Tank Installation
1. Install in the reverse order of removal. Fuel tank band installation nut: 39.2 ~ 54.0 N.m (4.0 ~ 5.5 kgf.m, 28.9 ~ 39.8 lb-ft) ...

Components Location
1. Overdrive Clutch (OD/C) 2. One-Way Clutch (OWC) 3. Low&Reverse Brake (LR/B) 4. Underdrive Brake (UD/B) 5. 26 Brake (26/B) 6. 35R Clutch (35R/C) 7. Damper Clutch ...

Copyright � www.kifomanual.com 2014-2026