Kia Forte: Driveshaft and axle

Shift Cable Adjustment

1. Place the shift lever in the interior, and the transmission manual control lever, to the N position. 2. Connect the shift lever (B) in ...

Specification

Engine T/M Joint type Max . permissible angle Outer Inner Outer Inner Nu 1.8 MPI 6 M/T BJ#22 TJi#22 ...

See also:

Engine Control Module (ECM) Installation
   When replacing the ECM, the vehicle equipped with the immobilizer must be performed procedure as below. ...

Photo Sensor Description
The photo sensor is located at the center of the defrost nozzle. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light receiving p ...

Control Cable Removal
1. Remove the floor console assembly. (Refer to Body - " Floor Console") 2. Remove the select cable (B) by removing the snap ...