Kia Forte: Engine Mounting Components
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Engine And Transaxle Assembly / Engine Mounting Components
| 1. Transaxle mounting bracket 2. Roll rod bracket |
3. Engine mounting bracket 4. Engine mounting support bracket |
Engine Room Under Cover Removal and Installation
1.
Remove the under cover front panel (A).
2.
Remove the under covers (B).
Tightening torque:
3.9 ~ 5.9 N ...
Engine Mounting Removal and Installation
Engine mounting bracket
1.
Install the jack to the edge of oil pan to support the engine.
...
See also:
Room lamp
To turn the room lamp ON or OFF, push the switch.
If your vehicle is not equipped with a map lamp, the room lamp will also turn
on or off as follows.
The room lamp comes on when a door is opene ...
Flywheel Removal and installation
1.
Remove the manual Transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle ")
2.
Remove the flywheel (A).
...
Engine Control Module (ECM) Removal
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
Copyright © www.kifomanual.com 2014-2025