Kia Forte: Body Panel Gaps

Front Cross Member

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] ...

4Door

...

See also:

Front Hub / Knuckle Reassembly
1. Install the hub bearing to the knuckle assembly. (1) Lay the knuckle assembly (A) on press. (2) ...

Auto Light Sensor Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the auto light sensor (A) from crash pad upper side by using screw (-) driver. ...

Adjustment
Stop lamp switch clearance adjustment If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the s ...