Kia Forte: Rear Body
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Side outer panel rear corner |
Tail gate hinge mounting hole (Ø12) |
Tail gate lifter mounting hole (Ø10) |
|
|
|
|
| Side outer panel rear corner |
Rear bumper mounting hole (8.5X8.5) |
Rear bumper mounting hole (14X10) |
|
|
||
| Rear bumper mounting hole (Ø10) |
Interior
Interior A
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Interior B
* These dimens ...
Under Body
Projected Dimensions
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Actual-Measurement Dimensions
...
See also:
Canister Close Valve (CCV) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the CCV connector.
3.
Measure resistance between the CCV termina ...
Immobilizer Control Unit Installation
1.
Install the immobilizer unit.
2.
Connector the immobilizer unit.
3.
Install the crash pad lower panel.
...
Canister Installation
1.
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
Copyright © www.kifomanual.com 2014-2025