Kia Forte: Replacement - Fender - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Fender / Replacement

  
Be careful not to damage the fender and body.
  
When removing the clips, use a clip remover.
1.
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps")
2.
Remove the quarter fixed glass.
(Refer to "Quarter Fixed Glass")
3.
Loosen the front wheel guard mounting clips and screws.

4.
After loosening the mounting screws, then remove the front bumper side mounting bracket (A).

5.
After loosening the mounting bolts and nut, then remove the fender assembly (A).

6.
Install in the reverse order of removal.
  
Replace any damaged clips.
Component Location
1. Fender assembly ...

Hood
...

See also:

Heater Unit Component Location
...

Antenna Coil Installation
1. Install the antenna coil. 2. Connect the antenna coil connector. 3. Install the crash pad lower panel. ...

General Troubleshooting Information
Before Troubleshooting 1. Check applicable fuses in the appropriate fuse/relay box. 2. Check the battery for damage, state of charge, and cl ...

Copyright www.kifomanual.com 2014-2026