Kia Forte: Tail Gate Latch Replacement
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Put on gloves to protect your hands.
|
|
|
1. |
After loosening the mounting bolts, then remove the tail gate
latch assembly (A).
Tightening torque :
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 8.0 lb-ft)
|

|
|
2. |
Disconnect the tail gate latch connector (A).

|
|
3. |
Install in the reverse order of removal.
|
• |
Make sure the tail gate locks/unlocks and opens/closes
properly.
|
|
• |
Adjust the tail gate alignment.
|
|
• |
Make sure the connectors are connected in properly.
|
|
|
(5Door)
1. Tail gate latch assembly
...
(5Door)
•
Take care to not let the tailgate fall on you as the lifts
are ...
See also:
Brake Booster Vacuum Pressure Sensor Description
In order to ensure adequate brake power assistance in every situation,
the brake booster is equipped with a partial vacuum sensor. The brake booster
vacuum pressure sensor is located beside t ...
Rear Seat Assembly Component Location
(4Door, 2Door)
1. Rear seat cushion assembly
2. Rear seat back assembly
(5Door)
1. Rear seat back assembly [LH]
2. Rear seat back ...
CVVT & Camshaft Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force
generated by the engine oil supplied to the advance or retard chamber in accordance
with the CVVT oil control valve con ...