1. |
Remove the front door window glass.
(Refer to Front Door - "Front Door Window Glass")
|
2. |
Disconnect the front door main connector (A).
|
3. |
Disconnect the outside rear view mirror connector (A).
(4Door, 5Door)
(2Door)
|
4. |
Loosen the front door latch (B) mounting screws.
|
5. |
After loosening the mounting bolts, then remove the front door
module (A).
(4Door, 5Door)
(2Door)
|
6. |
Disconnect the front door outside handle connector (A) and remove
the front door outside handle rod (B).
|
7. |
Remove the front door main connector pad (A) and mounting clip
(B).
|
8. |
Disconnect the front door latch connectors (A).
|
9. |
Disconnect the connectors and front door module wiring harness
(A).
|
10. |
Remove the front door latch assembly.
(Refer to Front Door - "Front Door Latch")
|
11. |
Reomove the front speaker .
(Refer to Body Electrical System - "Speakers")
|
12. |
Remove the front power window motor.
(Refer to Body Electrical System - "Power Window Motor")
|
13. |
Install in the reverse order of removal.
|
Emergency while driving
In an emergency situation while the vehicle is in motion, you are able to turn
the engine off and to the ACC position by pressing the ENGINE START/STOP button
for more than 2 seconds or 3 times succ ...
Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications
Direct control VFS[T/CON]
▷ Control type : Normal low type
Control Pressure kpa (kgf/cm², psi)
9.81 ~ 500.14 (0.1 ~ 5.1,1.42 ~ 72.54)
Current value(mA)
...
Trunk Lid Trim Component Location
(4Door, 2Door)
1. Trunk lid trim
...