1. |
Open the glass fully.
|
2. |
Remove the mounting pins (C), from the frame (B), and then remove
the deflector (A).
|
3. |
Install in the reverse order of removal.
|
Heated Oxygen Sensor (HO2S) Description
Heated Oxygen Sensor (HO2S) consists of zirconium and alumina and is installed
both upstream and downstream of the Catalytic Converter. It varies in accordance
with the air/fuel ratio.
Th ...
Trunk Lid Assembly Replacement
(4Door, 2Door)
•
Wear gloves to protect hands from injury.
...
Brake Booster Vacuum Pressure Sensor Installation
Brake Booster Vacuum Pressure Sensor can not be replaced separately
due to vacuum leak.
Therefore, the sensor mu ...