Kia Forte: Rear Shelf Side Trim Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Fold the rear seat back assembly.
|
|
2. |
Remove the rear shelf side trim mounting caps.
|
|
3. |
After loosening the mounting bolts, then remove the rear shelf
side trim (A).
|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
(5Door)
1. Rear shelf side trim
...
(5Door)
1. Rear transverse trim
...
See also:
General Troubleshooting Information
Before Troubleshooting
1.
Check applicable fuses in the appropriate fuse/relay box.
2.
Check the battery for damage, state of charge, and cl ...
Canister Installation
1.
Installation is the reverse of removal.
Canister installation bolt/nut:
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)
...
ETC (Electronic Throttle Control) System Inspection
Throttle Position Sensor (TPS)
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Start the engine and measure the output voltage of TP ...
Rear Shelf Side Trim Component Location
Rear Transverse Trim Component Location