Kia Forte: Multimedia Jack Installation - Audio - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Multimedia Jack Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Audio / Multimedia Jack Installation

1.
Install the multimedia jack.
2.
Connect the multimedia jack connector.
3.
Install the floor console assembly.
  
Make sure the multimedia connector and the floor console assembly connectors are plugged in properly.
Multimedia Jack Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the floor console assembly. (Refer to Body - "Floor Console Assembly&quo ...

Customer Complaint Analysis Check Sheet
There are six areas where a problem can occur: wiring harness, the radio, the CD player, and speaker. Troubleshooting enables you to confine the problem to a particular area. Chart 1 ...

See also:

Electric Oil Pump Removal
1. Disconnect the negative (-) battery terminal. 2. Disconnect the Electric Oil Pump (EOP) connector (A). 3. ...

Hub nut tightening sequence
Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Cylinder Head Reassembly
   • Thoroughly clean all parts to be assembled. • ...

Copyright © www.kifomanual.com 2014-2024