Kia Forte: Air Ventilation Seat Unit Description - Seat Electrical - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Air Ventilation Seat Unit Description

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Unit Description

The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion.

  
1.
Make sure not to spoil drink or water on the seat when equipping with ventilation system seat
2.
Because of inhaling the slight air, it is difficult to feel the air strength by the sense of touch.
Air Ventilation Seat Unit Circuit Diagram
...

Air Ventilation Seat Unit Removal
Cushion Blower 1. Remove the front seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the cushion blower (A) ...

See also:

Installation
   Be sure to install the harness wires not to be pinched or interfered with other parts. ...

SS-A Solenoid Valve(ON/OFF) Description
Shift Solenoid(SS) Valve-A is attached to the valve body and is an on/off solenoid valve that is used to change gears. Shift Solenoid(SS) Valve-A is installed at valve body. ...

Resetting The Sunroof
Whenever the vehicle battery is disconnected or discharged, or you use the emergency handle to operate the sunroof, you have to reset your sunroof system as follows : 1. ...

Copyright © www.kifomanual.com 2014-2024