Kia Optima Manuals

Kia Forte: Air Ventilation Seat Unit Removal - Seat Electrical - Body Electrical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Air Ventilation Seat Unit Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Unit Removal

Cushion Blower
1.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
2.
Remove the cushion blower (A) after loosening the mounting screws (3EA) and disconnecting the blower connector.
Back Blower
1.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
2.
Remove the front seat back cover.
(Refer to Body - "Front Seat Back Cover")
3.
Remove the back blower (A) after loosening the mounting screws (2EA) and disconnecting the blower connector.
Air Ventilation Unit
1.
Remove the front seat assembly.
(Refer to Body - "Front Seat Assembly")
2.
Remove the air ventilation unit (A) after loosening the mounting screws (2EA) and disconnecting the connector.
[Driver]

[Passenger]
Air Ventilation Seat Unit Description
The ventilated seat system uses a Push method to cool the seat. A blower mounted in the seat generates the cool air, which then travels through ducts to the seat back and cushion. ...

Air Ventilation Seat Unit Installation
Cushion Blower 1. Install the cushion blower under the bottom of the seat. 2. Install the front seat aseembly. Back Blower ...

See also:

Output Speed Sensor Specifications
▷ Type: Hall effect sensor Operation condition [°C(°F)] ((-)40 ~ 150)) -40 ~ 302 Air gap(mm)in. (1.1 ~ 1.55) 0.043 ~ 0.061 Output voltage ...

Transaxle Oil Temperature Sensor Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Blower Motor Replacement
1. Disconnect the negative (-) battery terminal. 2. Disconnect the connector (A) of the blower motor. 3. Remove ...

Categories

Copyright � www.kifomanual.com 2014-2026