Kia Forte: Power Outside Mirror Switch Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Power Door Mirrors / Power Outside Mirror Switch Installation
| 1. |
Install the driver power window switch and connectors.
|
| 2. |
Install the front door trim.
|
Power Outside Mirror Switch Removal
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
...
Power Door Mirror Actuator Inspection
1.
Disconnect the negative(-) battery terminal.
2.
Remove the front door quadrant inner cover (A).
3.
D ...
See also:
Brake Booster Vacuum Pressure Sensor Description
In order to ensure adequate brake power assistance in every situation,
the brake booster is equipped with a partial vacuum sensor. The brake booster
vacuum pressure sensor is located beside t ...
Rear Center Seat Belt Retractor Replacement
(4Door)
•
When installing the belt, make sure not to damage the
retractor. ...
Intake Air Temperature Sensor (IATS) Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the IATS connector.
3.
Measure resistance between the IATS termi ...
Copyright © www.kifomanual.com 2014-2025