Kia Forte: Front Washer Motor Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Windshield Wiper/Washer / Front Washer Motor Inspection
| 1. |
With the washer motor connected to the reservoir tank, fill the
reservoir tank with water.
|
| 2. |
Connect positive (+) battery cables to terminal 2 and negative
(-) battery cables to terminal 1 respectively.
|
| 3. |
Check that the motor operates normally and the washer motor runs
and water sprays from the front nozzles.
|
| 4. |
If they are abnormal, replace the washer motor.
|
Front Wiper Motor Inspection
Speed Operation Check
1.
Remove the connector (A) from the wiper motor.
2.
Attach the positive (+) lead from the battery to terminal ...
Front Washer Motor Removal
-
When servicing the washer pump, be careful not to damage
the washer pump seal.
...
See also:
Heater & A/C Control Unit (DATC) Component
Connector Pin Function
Connector
No.
Description
Connector
No.
Description
A
1
Illumination (+) (Tail)
A
...
Immobilizer system (if equipped)
Your vehicle may be equipped with an electronic engine immobilizer system to
reduce the risk of unauthorized vehicle use.
Your immobilizer system is comprised of a small transponder in the ignit ...
Fuel Pump Inspection
[Fuel pump]
1.
Turn ignition switch OFF and disconnect the negative (-)battery
cable.
2.
Remove the fuel pump assembly.
...
Copyright © www.kifomanual.com 2014-2025