Kia Forte: Removal
| 1. |
Remove the mirror wiring cover (A).
|
| 2. |
Disconnect the mirror connector (B).
|
| 3. |
Loosen the mirror mounting screw.
|
| 4. |
Push the mirror base up to remove the mirror assembly (A).
|
Inspection
Check it by the procedure below to see if the function of the ECM is normal.
1.
Turn the ignition key to the "ON" position.
2.
Cov ...
Installation
1.
Install the mirror assembly.
2.
Install the mirror wiring cover and connector.
...
See also:
Front Door Inside Handle Replacement
(4Door, 5Door, 2Door)
1.
Remove the front door trim.
(Refer to Front Door - "Front Door Trim")
2.
After loosenin ...
Circuit Diagram
...
Inspection
If any of the following conditions occur, WCS reset and accuracy check
should be performed.
•
The WCS ECU or any of the sensors is replaced.
•
...
Categories
- Home
- Kia Forte BD 2019-2026 Owners Manual
- Kia Forte BD 2019-2026 Service Manual
- First Generation
- Second generation
- Kia Forte TD 2014-2018 Owners Manual
- Kia Forte TD 2014-2018 Service Manual
Copyright � www.kifomanual.com 2014-2026