Kia Forte: Hands Free Switch Removal
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body Electrical System / Hands Free System / Hands Free Switch Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the driver airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
| 3. |
Remove the steering wheel.
(Refer to Steering System - "Steering Column and Shaft")
|
| 4. |
Remove the steering wheel cover (A) after loosening the screw.
|
| 5. |
Disconnect the steering heater connectors (A).
|
| 6. |
Remove the steering remote control switch assembly after loosening
the mounting screws (4EA).
|
| 7. |
Disconnect the switch connectors (A).
|
| 8. |
Remove the remote control switchs (A) after loosening the mounting
screws.
|
Hands Free Switch Inspection
1.
Check the hands free remote control switch for resistance between
terminals in each switch position.
Switch
Connector
...
Hands Free Switch Installation
1.
Reassemble the steering wheel remote control switch after connecting
the connector.
2.
Reassemble the driver airbag module.
...
See also:
Crankshaft Position Sensor (CKPS) Specification
Item
Specification
Coil Resistance(Ω)
774 ~ 946 [20°C (68°F)]
...
On-board Refueling Vapor Recovery (ORVR) valve Removal
1.
Turn the ignition switch OFF, and then remove battery (-) cable.
2.
Remove the fuel pump.
(Refer to Fuel System - "Fuel Pump&qu ...
Radiator Grill Component Location
(4Door)
1. Radiator grill
(5Door, 2Door)
1. Radiator grill
...
Copyright © www.kifomanual.com 2014-2025