1. |
Install the start/stop button.
|
2. |
Connect the start/stop button connector.
|
3. |
Install the cluster fascia panel and center garnish.
|
Audio Unit Removal
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply prote ...
Rear Shock Absorber Inspection
1.
Check the rubber parts for wear and deterioration.
2.
Compress and extend the piston rod (A) and check that there is
no abnormal resista ...
Front Stabilizer Link Replacement
1.
Loosen the wheel nuts slightly.
Raise the vehicle, and make sure it is securely supported.
2.
Remove the front wheel and tire (A ...