Kia Forte: Ignition Switch Assembly

Start/Stop Button Installation

1. Install the start/stop button. 2. Connect the start/stop button connector. 3. Install the cluster fascia pan ...

Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Low Panal") ...

See also:

Auto Defogging Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defoggin ...

Installation
1. Install the BCM unit. 2. Install the center lower cover. 3. Install the floor console assembly. ...

35R Clutch Control Solenoid Valve(35R/C_VFS) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...