Kia Optima Manuals

Kia Forte: Drive Belt Installation - Timing System - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Drive Belt Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Drive Belt Installation

1.
Install the drive belt.
(1)
Install the drive belt (C).
(2)
Adjust the tension by turning the tension adjusting bolt (B) clockwise.
Belt tension
New belt:
637.4 ~ 735.5 N (65 ~ 75 kgf, 143.3 ~ 165.3 lbf)
Used belt:
441.3 ~ 539.4 N (45 ~ 55 kgf, 99.2 ~ 121.3 lbf)
(3)
Tighten the alternator mounting bolts (A) with the specified torque.
Tightening torque
M10 bolt:
29.4 ~ 41.2 N.m (3.0 ~ 4.2 kgf.m, 21.7 ~ 30.4 Ib-ft)
M8 bolt:
21.6 ~ 32.4 N.m (2.2 ~ 3.3 kgf.m, 15.9 ~ 23.9 Ib-ft)

Drive Belt Inspection
1. Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.    ...

Drive Belt Tensioner Components
1. Alternator brace 2. Adjust nut ...

See also:

Front Hub / Knuckle Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Rear Seat Back Cover Component Location
(4Door, 2Door) 1. Rear seat back cover [LH] 2. Rear seat back cover [RH] (5Door) 1. Rear seat back assembly [LH] 2. Rear seat ...

Alternator Reassembly
1. Reassemble in the reverse order of disassembly.    • ...

Categories

Copyright www.kifomanual.com 2014-2026