Kia Forte: Drive Belt Tensioner Removal and Installation
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Timing System / Drive Belt Tensioner Removal and Installation
| 1. |
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
|
| 2. |
Remove the alternator lower bolt (A).
|
| 3. |
Remove the alternator brace (B).
|
| 4. |
Install in the reverse order of removal.
|
Drive Belt Tensioner Components
1. Alternator brace
2. Adjust nut
...
Drive Belt Tensioner Inspection
Check the belt tensioner for excessive foreign substances, crack, damage
or sticking of pivot shaft. Replace if necessary. ...
See also:
Mode Control Actuator Description
The mode control actuator is located at the heater unit.
It adjusts the position of the mode door by operating the mode control
actuator based on the signal of the A/C control unit. Pressing ...
Flywheel Removal and installation
1.
Remove the manual Transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle ")
2.
Remove the flywheel (A).
...
Windshield defrosting and defogging
WARNING - Windshield heating
Do not use the
or
position during cooling operation in extremely humid weather to reduce the likelyhood
of fog up.
For maximum defrosting, set the tempe ...
Copyright © www.kifomanual.com 2014-2025