Kia Forte: Crankshaft Damper Pulley Components

Drive Belt Tensioner Inspection

Check the belt tensioner for excessive foreign substances, crack, damage or sticking of pivot shaft. Replace if necessary. ...

Crankshaft Damper Pulley Removal and Installation

1. Remove the RH front wheel. 2. Remove the drive belt. (Refer to Timing System - "Drive Belt") 3. ...

See also:

Inspection
W/Harness Inspection 1. Check the vehicle speed sensor by using the scan tool. (if normal, current vehicle speed is display) 2. Chec ...

Accelerator Position Sensor (APS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Turn the ignition switch ON. 3. Measure the output volt ...

Components
1. Timing chain cover 2. Inner roter 3. Outer roter 4. Oil pump cover 5. Relief plunger 6. Relief spring 7. Relief plug 8. O-ring (suction side) 9. O-ring (disch ...