Kia Forte: Flywheel Removal and installation - Cylinder Block - Engine Mechanical System - Kia Forte TD 2014-2018 Service ManualKia Forte: Flywheel Removal and installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Mechanical System / Cylinder Block / Flywheel Removal and installation

1.
Remove the manual Transaxle.
(Refer to Manual Transaxle System - "Manual Transaxle ")
2.
Remove the flywheel (A).

Tightening torque :
117.7 ~ 127.5 N.m (12.0 ~ 13.0 kgf.m, 86.8 ~ 94.0 lb-ft)

  
Do not reuse the bolts.
3.
Install in the reverse order of removal.
Flywheel Components
1. Flywheel ...

Rear Oil Seal Components
1. Rear oil seal ...

See also:

SS-A Solenoid Valve(ON/OFF) Inspection
1. Turn ignition switch OFF. 2. Disconnect the Solenoid valve connector. 3. Measure resistance between sensor ...

Compressor Installation
1. Make sure the compressor mounting bolt with the correct length is screwed in. Tighten the mounting bolts (A) with the specified tightening order. ...

Oil Cooler Components
1. Radiator 2. Radiator upper mounting bracket 3. Lower mounting insulator 4. Radiator upper hose 5. Filler neck assembly 6. Radiator lower hose 7. Clamp ...

Copyright � www.kifomanual.com 2014-2026