Kia Forte: Components Location
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Components Location
| [LEV2 Type] |
| [SULEV Type] |
| 1. PCV valve 2. Canister 3. Purge control solenoid valve (PCSV) 4. Fuel tank pressure sensor (FTPS) |
5. Canister close valve (CCV) 6. Fuel level sender (FLS) 7. Fuel tank air filter 8. Catalytic converter 9. Auxiliary canister [SULEV Type only] |
| 1. PCV Valve |
2. Canister [LEV2 Type] |
|
|
|
| 2. Canister [SULEV Type] 5. Canister Close Valve (CCV) [SULEV Type] 7. Fuel Tank Air Filter [SULEV Type] 9. Auxiliary Canister [SULEV Only] |
3. Purge Control Solenoid Valve (PCSV) |
|
|
|
| 4. Fuel Tank Pressure Sensor (FTPS) [SULEV Type] |
4. Fuel Tank Pressure Sensor (FTPS) [LEV2 Type] |
|
|
|
| 5. Canister Close Valve (CCV) [LEV2 Type] 7. Fuel Tank Air Filter [LEV2 Type] |
6. Fuel Level Sender (FLS) |
|
|
|
| 8. Catalytic Converter [SULEV Type] (WCC) |
8. Catalytic Converter [SULEV Type] (UCC) |
|
|
|
| 8. Catalytic converter [LEV2 Type] (CCC) |
|
|
|
Tightening Torques
Item
kgf.m
N.m
lb-ft
Positive crankcase ventilation valve installation
0.2 ~ 0.3
1.96 ~ 2.94
1.45 ~ 2.17
Canister install ...
Description
Emissions Control System consists of three major systems.
•
The Crankcase Emission Control System prevents blow-by gas from
releasing into the atmosphere. This system recy ...
See also:
Passenger Airbag (PAB) Module
The passenger airbag (PAB) is installed inside the crash pad and protects
the front passenger in the event of a frontal crash. The SRSCM determines if
and when to deploy the PAB.
...
Output Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification:
Refer to "Signal Wave Form" section.
...
Power Window Motor Inspection
Front Power Window Motor Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Disconnect the c ...
Copyright © www.kifomanual.com 2014-2025