Kia Forte: Positive Crankcase Ventilation (PCV) Valve Installation - Crankcase Emission Control System - Emission Control System - Kia Forte TD 2014-2018 Service ManualKia Forte: Positive Crankcase Ventilation (PCV) Valve Installation

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Installation

1.
Installation is reverse of removal.

PCV Valve installation:
1.96 ~ 2.94 N.m (0.2 ~ 0.3 kgf.m, 1.45 ~ 2.17 lb-ft)

Positive Crankcase Ventilation (PCV) Valve Inspection
1. Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger movement.    ...

Evaporative Emission Control System
...

See also:

ESC Control Module Removal
1. Turn the ignition switch OFF. 2. Pull up the lock of the HECU connector (A) , then disconnect the connector. ...

Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing fuse/relay name and capacity. ✽ NOTICE Not all fuse panel descriptions in this manual may be applicable t ...

Front Strut Assembly Replacement
1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A ...

Copyright www.kifomanual.com 2014-2026