Kia Forte: Crankshaft Position Sensor (CKPS) Inspection
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) Inspection
| 1. |
Check signal waveform of CKPS and CMPS using a scan tool.
|
Crankshaft Position Sensor (CKPS) Circuit Diagram
(M/T)
(A/T)
...
Crankshaft Position Sensor (CKPS) Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Disconnect the crankshaft position sensor connector (A) ...
See also:
CVVT & Camshaft Installation
1.
Install the CVVT assembly (A) to the camshaft.
Tightening torque :
64.7 ~ 76.5 N.m (6.6 ~ 7.8 kgf.m, 47.7 ~ 56.4 lb-ft)
...
Piston and Connecting Rod Components
1. Piston ring
2. Snap ring
3. Piston pin
4. Piston
5. Connecting rod
6. Connecting rod upper bearing
7. Connecting rod lower bearing
8. Connecting rod bearing cap ...
Brake Booster Vacuum Pressure Sensor Installation
Brake Booster Vacuum Pressure Sensor can not be replaced separately
due to vacuum leak.
Therefore, the sensor mu ...
Copyright © www.kifomanual.com 2014-2025