Kia Forte: Fuel Tank Pressure Sensor (FTPS) Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS) Specification
| Pressure [kPa (kgf/cm², in H2O) |
Output Voltage (V) |
| -6.67 (-0.068, -26.8) |
0.5 |
| 0 |
2.5 |
| +6.67 (0.068, 26.8) |
4.5 |
Fuel Tank Pressure Sensor (FTPS) Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission
control system and is installed on the fuel tank, the fuel pump, or the canister.
It checks the purge control solen ...
Fuel Tank Pressure Sensor (FTPS) Circuit Diagram
(M/T)
(A/T)
...
See also:
Heater & A/C Control Unit (DATC) Component
Connector Pin Function
Connector
No.
Description
Connector
No.
Description
A
1
Illumination (+) (Tail)
A
...
IMS Control Switch Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
Ambient Temperature Sensor Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect ambient temperature sensor.
3.
Check the resistance of the ambie ...
Copyright © www.kifomanual.com 2014-2025