Kia Forte: Components Location
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Components Location
| [SULEV Type] |
| [LEV2 Type] |
| 1. Fuel tank 2. Fuel pump 3. Fuel filter 4. Fuel pressure regulator 5. Canister 6. Fuel tank air filter 7. Fuel tank band 8. Fuel tank pressure sensor (FTPS) |
9. Canister close valve (CCV) 10. Fuel level sender (FLS) 11. Fuel filler hose 12. Ventilation tube 13. Vapor tube 14. Fuel pump plate cover 15. Auxiliary canister |
Fuel Pressure Test
1.
Release the residual pressure in fuel line (Refer to the Fuel
Delivery System - Repair Procedures - "Release Residual Pressure in
Fuel Line").
...
See also:
Canister Close Valve (CCV) Circuit Diagram
(M/T)
(A/T)
...
Photo Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With a flat-head screwdriver, remove the photo sensor (A) from
the center of the defros ...
Certification label
The certification label is located on the driver's door sill at the center pillar.
This label shows the maximum allowable weight of the fully loaded vehicle. This
is called the GVWR (Gross V ...
Copyright © www.kifomanual.com 2014-2025