Kia Forte: Description
| • |
Component location : Clutch
switch is connected to top of the clutch pedal assembly.
|
| • |
Function
|
| 1. |
Clutch operation is detected through clutch switch signal. This
signal enables ECM to cope with instant change of load condition.
|
| 2. |
Clutch switch signal is used to detect engaged gear with vehicle
speed and engine speed.
|
Clutch Switch
...
Specifications
Item
Specifications
Working voltage
DC 12V
Operating force
9.8 ± 2.9N
(1.0 ± 0.3kg, 7.2 ± 0.7lb)
Voltage drop
-0.4V
...
See also:
Front Cross Member
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
...
ESC Control Module Installation
1.
Install in the reverse order of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...
ETC (Electronic Throttle Control) System Removal
1.
Turn the ignition switch OFF and disconnect the battery negative
(-) cable.
2.
Remove the resonator and the air intake hose (Refer to “I ...
Copyright © www.kifomanual.com 2014-2025