Kia Forte: Removal - Clutch Release Fork and Clutch Release Bearing - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Release Fork and Clutch Release Bearing / Removal

1.
Remove the transaxle assembly.
(Refer to Manual Transaxle System - " Manual Transaxle")
2.
Remove the clutch release bearing (A).

3.
Pull the clip (A).

4.
Remove the clutch release fork (A).

5.
Remove the boot (A).

Components
1. Clutch release fork 2. Clutch cover assembly 3. Clutch disk assembly 4. Clutch release bearing ...

Inspection
1. Check for damage to boot. 2. Check for deformation to clutch release fork. 3. Check for deformation to clutc ...

See also:

Back up lamp, Rear fog lamp
1. Take the lamp assembly out. 2. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 3. Remove the bulb by ...

Starter Reassembly
1. Reassemble in the reverse order of disassembly. ...

Hands Free Switch Circuit Diagram
...

Copyright www.kifomanual.com 2014-2025