Kia Forte: Inspection - Clutch Release Fork and Clutch Release Bearing - Clutch System - Kia Forte TD 2014-2018 Service ManualKia Forte: Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Release Fork and Clutch Release Bearing / Inspection

1.
Check for damage to boot.
2.
Check for deformation to clutch release fork.
3.
Check for deformation to clutch release bearing.
Removal
1. Remove the transaxle assembly. (Refer to Manual Transaxle System - " Manual Transaxle") 2. Remove the clutch release beari ...

Installation
1. Install the boot (A). 2. Install the clip to the clutch release fork. 3. Apply to grease in location ...

See also:

Starter Disassembly (NON-ISG Type)
1. Disconnect the M-terminal (A) on the magnet switch assembly. 2. After loosening the screws (A), detach the magnet switch ssembly ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Circuit Diagram
...

Front Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Copyright © www.kifomanual.com 2014-2025