Kia Forte: Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle Fluid / Inspection

1.	Uplift the vehicle with lift.

2.	Loosen the oil filler plug (A).

3.

Check the oil level.

Oil level must be up to fill the hole, if not, add oil until it runs over.

4.

Install the filler plug.

Tightening torque:

58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)

General Information

1. Check & Change intervals Check & Replenishment Change Capacity Oil specification ...

Replacement

1. Uplift the vehicle with lift. 2. Drain the manual transaxle oil after loosening the drain plug (A). 3. ...

See also:

Overdrive Clutch Control Solenoid Valve(OD/C_VFS) Specifications
Direct control VFS[OD/C] ▷ Control type : Normal high type Control Pressure kpa (kgf/cm², psi) 500.14 ~ 9.81 (5.1 ~ 0.1,72.54 ~ 1.42) Current value(mA) ...

Installation
1. Install the key lock cylinder. 2. Install the key warning switch and key Illumination. 3. Install the key wa ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

Categories

Copyright � www.kifomanual.com 2014-2026