1. |
Measure the tread depth of the tires.
|
2. |
If the remaining tread depth (A) is less than the limit, replace
the tire.
|
Checking For Pull And Wander |
1. |
Rotate the front right and front left tires, and perform a road
test in order to confirm vehicle stability.
|
2. |
If the steering pulls to the opposite side, rotate the front and
rear tires, and perform a road test again.
|
3. |
If the steering continues to pull to one side, rotate the front
right and left tires again, and perform a road test.
|
4. |
If the steering continues to pull to the opposite side, replace
the front wheels with new ones.
|
Oil Pump Removal and Installation
1.
Remove the timing chain cover.
(Refer to Timing System – “Timing Chain Cover”)
2.
Remove the oil pump cover (A).
...
Alternator Intallation
1.
Install in the reverse order of removal.
Adjust the alternator belt te ...
Hood Latch Release Handle Component Location
1. Hood latch release handle
...