Kia Forte: Removal - TPMS Sensor - Tire Pressure Monitoring System - Suspension System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Suspension System / Tire Pressure Monitoring System / TPMS Sensor / Removal

  
Handle the sensor with care.
1.
Remove the tire.
(Refer to Tire/Wheels - "Tire")
2.
Remove the valve nut.

  
The valve nut should not be re-used.
3.
Discard the valve assembly.
TPMS Sensor
1. Storage State Sensors are in this state when they first arrive at dealership. This state is entered by LF request/command only. Either LF request ...

Installation
Sensor Fit    • Handle the sensor with care. • ...

See also:

CVVT (Continuously Variable Valve Timing) System Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

Start/Stop Button Component
...

Inspection
Lighting Switch Inspection With the multifunction switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the mul ...

Copyright © www.kifomanual.com 2014-2025