Item |
Specification |
|
Type |
Electric Power Steering System |
|
Steering gear |
Type |
Rack & Pinion |
Rack stroke |
150 ± 1mm (5.9055 ± 0.0393) |
|
Steering angle (Max.) |
Inner |
39.6° (+0.5°/-1.5°) |
Outer |
32.5° |
Item |
Tightening torque (kgf.m) |
||
Nm |
kgf.m |
lb-ft |
|
Tire wheel hub nuts |
88.3 ~ 107.9 |
9.0 ~ 11.0 |
65.1 ~ 79.6 |
Steering wheel lock nut |
39.2 ~ 49.0 |
4.0 ~ 5.0 |
28.9 ~ 36.2 |
Steering column & universal joint |
49.0 ~ 58.8 |
5.0 ~ 6.0 |
36.2 ~ 43.4 |
Steering column mounting nuts |
12.8 ~ 17.7 |
1.3 ~ 1.8 |
9.4 ~ 13.0 |
Steering column mounting bolt |
44.1 ~ 49.0 |
4.5 ~ 5.0 |
32.5 ~ 36.2 |
Bolt connecting universal joint to pinion |
32.4 ~ 38.3 |
3.3 ~ 3.8 |
23.9 ~ 27.5 |
Tie rod end castle nut |
23.5 ~ 33.3 |
2.4 ~ 3.4 |
19.4 ~ 24.6 |
Lower arm to front axle |
78.5 ~ 88.3 |
8.0 ~ 9.0 |
57.9 ~ 65.1 |
Steering gear box to sub frame |
58.8 ~ 78.8 |
6.0 ~ 8.0 |
43.4 ~ 57.9 |
Stabilizer link nut |
98.1 ~ 117.7 |
10.0 ~ 12.0 |
72.3 ~ 86.8 |
Sub frame mounting bolts & nuts |
156.9 ~ 176.5 |
16.0 ~ 18.0 |
115.7 ~ 130.2 |
Sub frame stay bolts |
44.1 ~ 53.9 |
4.5 ~ 5.5 |
32.5 ~ 39.8 |
Engine Control Module (ECM) Removal
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
Inspection
Test the horn by connecting battery voltage to the 1 terminal and ground
the 2 terminal.
The horn should make a sound. If the horn fails to make a sound, replace
it.
Horn Relay Inspec ...
Drive plate Components
1. Piston ring
2. Snap ring
3. Piston pin
4. Piston
5. Connecting rod
6. Connecting rod upper bearing
7. Connecting rod lower be ...