Kia Forte: Replacement
| 1. |
Disconnect the battery negative cable from the battery and then
wait for at least 30 seconds.
|
| 2. |
Turn the steering wheel so that the front wheels can face straight
ahead.
|
| 3. |
Remove the airbag module.
(Refer to Restraint - "Driver Airbag (DAB) Module and Clock Spring")
|
| 4. |
Disconnect the connector & lock nut (A) and then remove the steering
wheel (B) by using special service tools (09561-11001).
|
| 5. |
Installation is the reverse of the removal.
|
Component
1. Airbag module
2. Remote control assembly
3. Garnish
4. Steering wheel
5. Wiring
6. Lower cover
...
Disaseembly
1.
Loosen the screw (A-3ea) and then remove the lower cover (B) from
the steering wheel body.
Tightening torque :
7.8 ~ 11.8 N.m(0.8 ...
See also:
Inspection (With GDS)
1.
Check BCM input/output specification of multifunction switch using
the GDS. If the specification is abnormal, replace the lamp or wiper
switch.
...
Engine Control Module (ECM) Installation
When replacing the ECM, the vehicle equipped with the immobilizer
must be performed procedure as below.
...
[CVVT System Mode]
(1) Low Speed / Low Load
(2) Part Load
(3) Low Speed / High Load
(4) High Speed / High Load
...
Copyright © www.kifomanual.com 2014-2025