Kia Forte: Front Body
Front Body A
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body B
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body C
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
Front Body D
| * These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Hood hinge mounting hole (Ø10) |
Fender apron upper member corner |
Front shock absorber mounting hole (Ø13) |
|
|
|
|
| Front shock absorber mounting hole (Ø13) |
Side outer panel front corner |
Side outer panel front corner |
|
|
|
|
| Engine mounting bracket hole (Ø11) |
Transaxle mounting hole (Ø12) |
Engine mounting bracket hole (Ø15) |
|
|
|
|
| Transaxle mounting hole (Ø13) |
Front side member tooling hole (Ø6.6) |
Front side member tooling hole (Ø6.6) |
|
|
||
| Front end module mounting hole (Ø11.5) |
5Door
...
Side Body
* These dimensions indicated in this figure are
actual-measurement dimensions. [ Unit : mm (inch) ]
Front side m ...
See also:
Hub nut tightening sequence
Tighten the hub nuts as follows.
Tightening torque:
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Crash Pad Side Cover Component Location
[LH]
1. Crash pad side cover [LH]
[RH]
1. Crash pad side cover [RH]
...
BCM Diagnosis With GDS
1.
The body control module can diagnose by using the GDS more quickly.
The BCM communicates with the GDS and then reads the input/output
value and drives the ac ...
Copyright © www.kifomanual.com 2014-2025