Kia Forte: Front Seat Shield Inner Cover Replacement - Front Seat - Body (Interior and Exterior) - Kia Forte TD 2014-2018 Service ManualKia Forte: Front Seat Shield Inner Cover Replacement

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Body (Interior and Exterior) / Front Seat / Front Seat Shield Inner Cover Replacement

  
Put on gloves to protect your hands.
  
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
After loosening the mounting screws, then remove the front seat shield inner cover (A).

3.
Install in the reverse order of removal.
  
Replace any damaged clips.
Front Seat Shield Inner Cover Component Location
1. Front seat shield inner cover ...

Front Seat Back Cover Component Location
1. Front seat back cover ...

See also:

Control Shaft Complete Installation
1. Install in the reverse order of removal.    • ...

Active ECO operation
Active ECO helps improve fuel efficiency by controlling the engine and transaxle. But fuel-efficiency can be affected by the driver's driving habits and road conditions. When the Active E ...

Heated Oxygen Sensor (HO2S) Removal
[SULEV] 1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the connector (A), and th ...

Copyright © www.kifomanual.com 2014-2024