Kia Forte: Fuel Tank Pressure Sensor (FTPS) Specification
Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Tank Pressure Sensor (FTPS) Specification
| Pressure [kPa (kgf/cm², in H2O) |
Output Voltage (V) |
| -6.67 (-0.068, -26.8) |
0.5 |
| 0 |
2.5 |
| +6.67 (0.068, 26.8) |
4.5 |
Fuel Tank Pressure Sensor (FTPS) Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission
control system and is installed on the fuel tank, the fuel pump, or the canister.
It checks the purge control solen ...
Fuel Tank Pressure Sensor (FTPS) Circuit Diagram
(M/T)
(A/T)
...
See also:
AGM Battery Installation
1.
Install in the reverse order of removal.
When installing the battery, ...
Brake Booster Operating Test
For simple checking of the brake booster operation, carry out the following
tests.
1.
Run the engine for one or two minutes, and then stop it. If the
pedal depresses ...
Filler-Neck Assembly Removal
1.
Open the fuel filler door and unfasten the filler-neck assembly
mounting screw (A).
2.
Remove the rear-LH wheel, tire, and the i ...
Copyright © www.kifomanual.com 2014-2025