Kia Forte: Hood Assembly Component Location

Adjustment

1. After loosening the hinge (A) mounting bolt, adjust the hood (B) by moving it up or down, or right or left. 2. Adjust the hood height by ...

Hood Assembly Replacement

   • Be careful not to damage the hood and body. ...

See also:

Delivery Pipe Installation
1. Install in the reverse order of removal. Delivery pipe installation bolt: 18.6 ~ 23.5 N.m (1.9 ~ 2.4 kgf.m, 13.7 ~ 17.4 lb-ft) ...

Variable Charge Motion Actuator (VCMA) Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the VCMA connector (A). ...

Rear Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Brake pad 6. Pad retainer ...