Kia Forte: Ignition Coil Installation

Ignition Coil Removal

1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

Ignition Coil Inspection

1. Measure the primary coil resistance between terminals (+) and (-). Standard value: 0.75Ω ± 15% ...

See also:

TJ Joint Inspection
1. Check the spider assembly for roller rotation, wear or corrosion. 2. Check the groove inside the joint case for wear or corrosion ...

Rear Door Side Weatherstrip Replacement
(4Door, 5Door) 1. Loosen the rear door checker (B) mounting bolt. Tightening torque: 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m,12.3 ~ ...

Starter Installation
1. Install in the reverse order of removal. Starter installation bolt: 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft) ...