Kia Forte: Inspection

Components

1. Union bolt 2. Gasket 3. Tube joint 4. Clutch tube 5. Valve plate 6. Valve spring 7. Bleeder screw 8. Release cylinder 9. Return spring 10. Piston 11. Bo ...

Removal

1. Drain the brake fluid through the bleed plug (A).    • ...

See also:

Instrument Cluster Description
Cluster Variant Coding As we have more options (ESC, TPMS, etc.) in the car, the dashboard now have more information to display depending on the chosen options. For this reason, we need ...

Adjustment
Stop lamp switch clearance adjustment If the gap between stop lamp switch and bracket is not 1.0 ~ 2.0mm(0.04~ 0.08in), conform to below. 1. Disconnect the s ...

ECM Problem Inspection Procedure
1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is fo ...