Kia Forte: Inspection

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Manual Transaxle System / Manual Transaxle Fluid / Inspection

1.	Uplift the vehicle with lift.

2.	Loosen the oil filler plug (A).

3.

Check the oil level.

Oil level must be up to fill the hole, if not, add oil until it runs over.

4.

Install the filler plug.

Tightening torque:

58.9 ~ 78.5 N.m (6.0 ~ 8.0 kgf.m, 43.4 ~ 57.8 lb-ft)

General Information

1. Check & Change intervals Check & Replenishment Change Capacity Oil specification ...

Replacement

1. Uplift the vehicle with lift. 2. Drain the manual transaxle oil after loosening the drain plug (A). 3. ...

See also:

Engine coolant temperature gauge
This gauge shows the temperature of the engine coolant when the ignition switch is ON. Do not continue driving with an overheated engine. If the gauge pointer moves beyond the normal range are ...

Door Switch Installation
1. Install in reverse of removal. ...

Operation
Evaporative System Monitoring Evaporative And ORVR Emission Control System This system consists of a fill vent valve, fuel shut-off valve, fuel cut valve (for roll over), two way val ...

Categories

Copyright © www.kifomanual.com 2014-2026