Kia Forte: Knock Sensor (KS) Circuit Diagram

Knock Sensor (KS) Specification

Item Specification Capacitance (pF) 850 ~ 1,150 ...

Knock Sensor (KS) Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the knock sensor connector (A). ...

See also:

Replacement
1. Uplift the vehicle with lift. 2. Drain the manual transaxle oil after loosening the drain plug (A). 3. ...

Checking the engine oil level
1. Be sure the vehicle is on level ground. 2. Start the engine and allow it to reach normal operating temperature. 3. Turn the engine off and wait for a few minutes (about 5 minutes) for the oil ...

Inhibitor Switch Inspection
   • Thoroughly check connectors for looseness, poor connection, bending, corrosion, contam ...