Kia Forte: maincat

Tire Installation

1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock posit ...

Hub nut tightening sequence

Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

See also:

Inspection
If any of the following conditions occur, WCS reset and accuracy check should be performed. • The WCS ECU or any of the sensors is replaced. • ...

Specifications
Front Suspension Item Specification Suspension type MacPherson Strut Shock absorber Type Gas Coil spring Nu Engine ...

Auto Light Sensor Inspection
In the state of IGN1 ON, when multifunction switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light sensor' ...