Kia Forte: Rear Back Armrest Replacement
| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Fold the rear seat back assembly [LH].
|
|
2. |
Remove the rear back armrest cap (A).
|
|
3. |
After loosening the mounting bolt, then remove the rear back armerst
(B).
|
|
4. |
Install in the reverse order of removal.
|
• |
Replace any damaged clips.
|
|
|
(4Door, 2Door)
1. Rear seat latch assembly
(5Door)
1. Rear seat latch
...
See also:
Overhead Console Lamp Installation
1.
Install the overhead console lamp after connecting the sunroof
switch connector and lamp connector.
2.
Install the lens after tightening ...
SS-B Solenoid Valve(ON/OFF) Inspection
1.
Turn ignition switch OFF.
2.
Disconnect the Solenoid valve connector.
3.
Measure resistance between sensor ...
Fuse/relay panel description
Inside the fuse/relay panel covers, you can find the fuse/relay label describing
fuse/relay name and capacity.
✽ NOTICE
Not all fuse panel descriptions in this manual may be applicable t ...
Rear Back Armrest Component Location
Rear Seat Latch Component Location