Kia Forte: Rear Seat Back Cover Component Location

Rear Seat Assembly Replacement

[Rear seat cushion assembly] 1. Disconnect the rear seat cushion heater connector (A) from the trunk inner side. 2. After loosening th ...

Rear Seat Back Cover Replacement

(4Door, 2Door) [LH]    • Put on gloves to protect your hands. ...

See also:

Variable Intake Solenoid (VIS) Valve Specification
Item Specification Coil resistance (Ω) 30.0 ~ 35.0 [20°C(68°F)] ...

Control Shaft Complete Installation
1. Install in the reverse order of removal.    • ...

Mode Control Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode con ...