Kia Forte: Removal - Front Disc Brake - Brake System - Brake System - Kia Forte TD 2014-2018 Service ManualKia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Brake System / Brake System / Front Disc Brake / Removal

1.
Remove the front wheel & tire.

Tightening torque:
88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)

2.
Loosen the hose eyebolt (C) and caliper mounting bolts (B), then remove the front caliper assembly (A).

Tightening torque:
Brake hose to caliper (C):
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Caliper assembly to knuckle (B):
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

3.
Remove the front brake disc by loosening the screws (A).

Front Disc Brake
Components 1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. Tightening torque: 21.6 ~ 31.4 N.m ...

See also:

Ambient Temperature Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Remove the engine room under cover front panel (A). 3. ...

Severe driving conditions
A- Repeatedly driving short distance of less than 5 miles (8 km) in normal temperature or less than 10 miles (16 km) in freezing temperature B- Extensive engine idling or low speed driving for long ...

Brake Booster Vacuum Pressure Sensor Description
In order to ensure adequate brake power assistance in every situation, the brake booster is equipped with a partial vacuum sensor. The brake booster vacuum pressure sensor is located beside t ...

Copyright www.kifomanual.com 2014-2025