Kia Forte: Removal

Second generation YD (2014-2018) / Kia Forte TD 2014-2018 Service Manual / Clutch System / Clutch Cover And Disc / Removal

1.	Remove the transaxle assembly. (Refer to Manual Transaxle System - " Manual Transaxle")

2.	Remove the clutch cover bolts. Be careful not to be bent or twist bolts. Loosen bolts in diagonal directions.

Components

1. Clutch cover assembly 2. Clutch disc assembly ...

Inspection

1. Inspect diaphragm spring wear which is in contact with a clutch release bearing. 2. Check the clutch cover and disc surface for wear or ...

See also:

Installation
1. Install in the reverse order of removal. Apply the specified grease to ...

Inspection
1. Check the clutch release cylinder for fluid leakage. 2. Check the clutch release cylinder boot for damage. ...

Manifold Absolute Pressure Sensor (MAPS) Inspection
1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the MAPS at idle and IG ON. Conditio ...

Categories

Copyright © www.kifomanual.com 2014-2026